How To Reset Your Albany Home System
An important advantage of having your home security set up professionally is that you seldom need to worry about it. Even so, there will likely be a few instances where you have to reset your alarms in Albany. If you use the ADT Command hub, your system reset usually requires just a couple taps of the touchscreen when you’ve experienced occurrences like battery changes, power outages, and false alarms.
Check Your Manual Before Resetting Your Alarm
Here’s a simple yet valuable tip before you begin to reset your Albany home security system, consult your manual prior to proceeding. You wouldn’t want to compromise your property’s defense because you hit a button in error. Additionally, the process may have changed if you switched from a number pad to a fully digital system. If there’s ever a time when you’re struggling to reset your system, don't hesitate to call your trusted security specialists.
Resetting Your Albany Home Security System Because Of A False Alarm
Usually, a false alarm occurs because of the accidental tripping of a sensor. You are able to utilize the control panel or bring up the ADT mobile app and tap the shield icon and enter your unique passcode to deactivate the alarms in these situations. You might receive notification from your monitoring professionals, but just let them know you had a false alarm.
Resetting Your Alarm After A Power Outage In Albany
If the power goes out because of a storm or other event, you may start hearing a steady beep from your central command hub. This lets you know that the alarm is using the battery backup. To reset the alarm and silence the constant chirping, you must take steps to disarm and rearm your security.
However, if your power outage lasts for an extended time, you might need a complete reset of your system. Heed the instructions in the manual -- usually by entering your PIN number and pressing the off button twice -- and you should be back to normal. You might continue to notice chirping caused by the secondary power source, as it might not cease until your battery reaches a full charge. Reach out to your security technician if you are still having problems with your ADT system 20 hours after the power is resumed.
How To Reset Your Home Security System After Replacing A Battery
There will be infrequent times when you must change a battery within one of your security devices. To do this, you should set your alarm system to "Test Mode" so you prevent setting off an alarm by accident. When the battery is replaced, move the alarm panel out of test mode and resume normal operations. If the system fails to register the device or the battery icon remains on, you could need a full reset of your security system.
Tips to Reset Your Albany Security System After Adding Or Deleting A Code
Adding and deleting users can be accomplished on the ADT Command panel and your ADT mobile app. You should never require a resetting of your system following the addition or deletion of a user or code. However, if you find yourself moving to a new house with an existing ADT system, you should call your security specialists at (518) 303-3311 to set up a new plan. The installation tech will come out and switch out equipment, install other alarms or cameras (as required), and perform a full reset.
An Easy-To-Use Security System Is Only A Call Away
Figuring out how to reset a home security system in Albany will likely be difficult if it fails to include clear instructions and features. If you’re ready to acquire your easy-to-use home security system, dial (518) 303-3311 or send in the form below. Our specialists are ready to help customize the right security system for your residence.